Frequently bought together:
Description
- Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikes
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes making higher cam lifts possible
- More power across the rpm range, with improved low and midrange torque, strongest from 1,000-4,000 rpm
- Increases valve timing accuracy by eliminating timing chain lash and loosely fit stock chain
- Material must be removed from inner surface of the stock gear cover to install
- A hydraulic press and other professional level tools are required for installation
- Cam bearings and gaskets must be replaced when installing new cams
- S&S recommends that adjustable pushrod/cover kit be used
- Not recommended for compression ratios of 10:1 or greater
- Kit includes inner gears, outer gears, inner and outer bearings, gaskets and instructions
- Made in the USA
Installer must check coil bind, valve to valve clearance, and valve to piston clearance.
Due to the inherent characteristics of gear drives, you may experience more valve train noise.
Not for '06 Dyna.
Related Products
Related Products
S&S CYCLE 330-0456 CAMS MR103CHN 99-06
S&S Cycle
MSRP:
$418.95
$361.58
Bolt-in camshaft for 103” engines with stock 8.7:1 compression ratio up to 10.5:1 compression ratioWorks with stock, un-ported heads, but is great for S&S CNC ported headsMore power across rpm range...
S&S CYCLE 330-0006 CAM 625CHN 99-06
S&S Cycle
MSRP:
$418.95
$361.58
For 95" or larger engines with compression ratios between 10.0 to 10.75:1High-lift springs and adjustable pushrods requiredStrongest from 3000-6000 rpmMade in the USA
Installer must check coil bind,...
S&S CYCLE 330-0426 CAMS HO635CHN 99-06
S&S Cycle
$357.39
High-powered cam for modified engines, increased compression, high-lift springs, adjustable pushrods and large bore throttle body requiredFor best results, requires ported heads low restriction...
S&S CYCLE 330-0002 CAM 551CHN 99-06
S&S Cycle
MSRP:
$418.95
$361.58
Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesMore power across the rpm range, with improved low and midrange...
S&S CYCLE 330-0462 CAMS MR103GD 99-06
S&S Cycle
MSRP:
$948.95
$836.95
Bolt-in camshaft for 103” engines with stock 8.7:1 compression ratio up to 10.5:1 compression ratioWorks with stock, un-ported heads, but is great for S&S CNC ported headsMore power across rpm range...