Frequently bought together:
Description
- Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikes
- More power across the rpm range, with improved low and midrange torque, strongest from 1,000-4,000 rpm
- Made in the USA
Not recommended for compression ratios of 10:1 or greater.
Installer must check coil bind, valve to valve clearance and valve to piston clearance.
Can be used with stock pushrods, springs, and lifters.
Related Products
Related Products
S&S CYCLE 106-4868 CAMS 551GD 07-17 TC
S&S Cycle
MSRP:
$948.95
$836.95
Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesReverses the rear cam's direction of rotation, providing...
S&S CYCLE 106-5235 CAMS 640EZ CHAIN 07-17 TC
S&S Cycle
MSRP:
$540.95
$464.61
Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with...
S&S CYCLE 106-4381 CAMS CHN DR 570C 07-17 TC
S&S Cycle
MSRP:
$399.95
$357.39
Designed for 88" to 103" CID engines with compression ratios between 9:1 and 10:1Kit includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, thread lock and instructionsStrongest from...
S&S CYCLE 330-0106 CAMS 583CHAIN 07-17 TC
S&S Cycle
MSRP:
$399.95
$357.39
Great overall cam for Softail and DynaProvides strong low-end torque and horsepowerStrongest from 1500-5000 rpmMade in the USA
Installer must check coil bind, valve to valve clearance and valve to...
S&S CYCLE 330-0350 CAMS HP103 GEAR 07-17 TC
S&S Cycle
MSRP:
$880.95
$792.86
Designed as bolt in cams for engines with 103" and stock 9.7:1 compression ratio up to 10.5:1Works with stock, un-ported heads, but is great for S&S CNC ported headsPower in 3000 rpm - 6000 rpm...