S&S Cycle
S&S CYCLE 106-5235 CAMS 640EZ CHAIN 07-17 TC
(No reviews yet)
Write a Review
- SKU:
- 0925-0746
- MPN:
- 1065235
- Condition:
- New
Frequently bought together:
Description
- Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- Intended for 95"/96"/103" and 110" engines with compression ratios between 10.5:1 and 11.5:1; strongest 3000 rpm - 6000 rpm range
- Made in the USA
Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
Not for models with OEM compression releases.
High-lift springs and adjustable pushrods required.
Related Products
Related Products
S&S CYCLE 106-4868 CAMS 551GD 07-17 TC
S&S Cycle
MSRP:
$948.95
$836.95
Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesReverses the rear cam's direction of rotation, providing...
S&S CYCLE 106-4858 CAMS 551CHAIN 07-17 TC
S&S Cycle
MSRP:
$399.95
$357.39
Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesMore power across the rpm range, with improved low and midrange...
S&S CYCLE 106-4840 CAMS 640EZ GEAR 99-06
S&S Cycle
MSRP:
$995.95
$944.95
Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with...
S&S CYCLE 106-4381 CAMS CHN DR 570C 07-17 TC
S&S Cycle
MSRP:
$399.95
$357.39
Designed for 88" to 103" CID engines with compression ratios between 9:1 and 10:1Kit includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, thread lock and instructionsStrongest from...
S&S CYCLE 330-0328 CAMS 635 CHAIN 07-17 TC
S&S Cycle
MSRP:
$418.95
$361.58
High lift camshaft for modified engines with 106" or greater displacement and compression ratios between 10.0:1 to 11.0:1Works with stock, unported heads, but S&S CNC ported heads are recommendedBest...