Frequently bought together:
Description
- Designed for 88" to 107" engines with compression ratios from 10.0:0 to 10.5:1 and 100" and 107" engines with compression ratios 9.7:1 to 10.5:1
- Strongest from 3500-6000 rpm for 88" to 103" engines and 2500-5000 rpm for larger engines
- Made in the USA
Installer must check coil bind, valve to valve clearance and valve to piston clearance.
Not for '06 Dyna.
Cams for '00-'06 are for use with stock splined drive gears; for installation on '99 you must purchase splined outer drive sprocket; S&S recommends Andrews 4340 steel drive sprocket.
Related Products
Related Products
S&S CYCLE 106-5299 CAM EZ-585CHN 99-06
S&S Cycle
MSRP:
$540.95
$464.61
Allows for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with...
S&S CYCLE 330-0002 CAM 551CHN 99-06
S&S Cycle
MSRP:
$418.95
$361.58
Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression, this is a bolt-in cam set for stock or mildly modified touring bikesMore power across the rpm range, with improved low and midrange...
S&S CYCLE 330-0456 CAMS MR103CHN 99-06
S&S Cycle
MSRP:
$418.95
$361.58
Bolt-in camshaft for 103” engines with stock 8.7:1 compression ratio up to 10.5:1 compression ratioWorks with stock, un-ported heads, but is great for S&S CNC ported headsMore power across rpm range...
S&S CYCLE 330-0006 CAM 625CHN 99-06
S&S Cycle
MSRP:
$418.95
$361.58
For 95" or larger engines with compression ratios between 10.0 to 10.75:1High-lift springs and adjustable pushrods requiredStrongest from 3000-6000 rpmMade in the USA
Installer must check coil bind,...
S&S CYCLE 330-0426 CAMS HO635CHN 99-06
S&S Cycle
$357.39
High-powered cam for modified engines, increased compression, high-lift springs, adjustable pushrods and large bore throttle body requiredFor best results, requires ported heads low restriction...