S&S CYCLE 330-0432 CAMS HO635GD 99-06
- SKU:
- 0925-1051
- MPN:
- 330-0432
- Condition:
- New
Frequently bought together:
Description
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible
- High lift camshaft for modified engines with 106" or greater displacement and compression ratios between 10.0:1 to 11.0:1
- Increases valve and timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
- Works with stock, unported heads, but S&S CNC ported heads are recommended
- Material must be removed from inner surface of the stock gear cover to install
- A hydraulic press and other professional level tools are required to install
- S&S requires that adjustable pushrod/cover kit be used
- Cam bearings and gaskets must be replaced when installing new cams
- Best power from 3000-6000 rpm
- This is not a bolt in camshaft kit
- Kit includes camshafts, inner gear, out gear drives, inner bearings, outer bearings, gaskets and instructions
- Made in the USA
Installer must check coil bind, valve to valve clearance and valve to piston clearance.
Due to the inherent characteristics of gear drives, you may experience more valve train noise.
Kit requires high performance valve springs when installed on '99-'04 models.
Related Products
Related Products
S&S CYCLE 330-0438 CAMS EZ-HO635GD 99-06
S&S Cycle
MSRP:
$1,070.95
$944.95
Start any engine regardless of displacement or compression ratio with a stock starterSave your starter and battery; tested for 10,000 starts without running battery downA
S&S CYCLE 330-0462 CAMS MR103GD 99-06
S&S Cycle
MSRP:
$948.95
$836.95
Bolt-in camshaft for 103” engines with stock 8.7:1 compression ratio up to 10.5:1 compression ratioWorks with stock, un-ported heads, but is great for S&S CNC ported headsMore power across rpm range...
S&S CYCLE 330-0448 CAMS HP103GD 99-06
MSRP:
$913.95
$822.56
CAM KITS FOR TWIN CAMGEAR DRIVE CAM KITSCamshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain driveReverses the rear cam's direction...
S&S CYCLE 330-0003 CAM 570CHN 99-06
S&S Cycle
MSRP:
$418.95
$361.58
Designed for 88" to 103" CID engines with compression ratios between 9:1 and 10:1Kit includes camshafts, gearcover gasket, bearings, retaining ring, o-ring, thread lock and instructionsStrongest from...
S&S CYCLE 330-0005 CAM 585CHN 99-06
S&S Cycle
MSRP:
$399.95
$357.39
Designed for 88" to 107" engines with compression ratios from 10.0:0 to 10.5:1 and 100" and 107" engines with compression ratios 9.7:1 to 10.5:1Strongest from 3500-6000 rpm for 88" to 103" engines...